Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for Internal Spur Gear Set, Bevel Gear Housing, Straight Bevel Gear, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.
Factory wholesale Hypoid Gear Efficiency - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon Detail:

Hypoid Gear Definition

hypoid gear working

A hypoid is a type of spiral bevel gear whose axis does not intersect with the  axis of the meshing gear. Hypoid gearings are used in power transmission products that are more efficient than conventional worm gearing. Transmission efficiency can reach 90% .

Hypoid Gear Feature

hypoid gear feature

The shaft angle of the hypoid gear is 90°, and the torque direction can be changed to 90°. This is also the angle conversion often required in the automobile, airplane, or wind power industry. At the same time, a pair of gears with different sizes and different numbers of teeth are meshed to test the function of increasing torque and decreasing speed, which is commonly referred to as “torque increasing and decreasing speed”. If a friend who has driven a car, especially when driving a manual car when learning to drive, when climbing a hill, the instructor will let you go to a low gear, in fact, it is to choose a pair of gears with a relatively large speed, which is provided at low speeds. More torque, thus providing more power to the vehicle.

1. Adjustable angular change of torque power

2. Higher loads: In the wind power industry, the automotive industry, whether it is passenger cars, SUVs, or commercial vehicles such as pickup trucks, trucks, buses, etc., will use this type to provide greater power.

3. Higher efficiency, lower noise: The pressure angles of the left and right sides of its teeth can be inconsistent, and the sliding direction of the gear meshing is along the tooth width and tooth profile direction, and a better gear meshing position can be obtained through design and technology, so that the entire transmission is under load. The next is still excellent in NVH performance.

4 Adjustable offset distance: Due to the different design of the offset distance, it can be used to meet different space design requirements. For example, in the case of a car, it can meet the ground clearance requirements of the vehicle and improve the pass ability of the car.

Manufacturing Plant

China the first one to import USA UMAC technology for hypoid gears .

door-of-bevel-gear-worshop-11
hypoid spiral gears heat treat
hypoid spiral gears manufacturing workshop
hypoid spiral gears machining

Inspection

Dimensions and Gears Inspection

Reports

We will provide compete quality reports to customers before every shipping like dimension report ,material cert ,heat treat report ,accuracy report and other customer’s required quality files .

Heat Treat report

Heat Treat report

Flaw detection report

Flaw Detection report

Packages

inner

Inner Package

Inner (2)

Inner Package

Carton

Carton

wooden package

Wooden Package

Our video show

Hypoid Gears

Km Series Hypoid Gears For Hypoid Gearbox

Hypoid Bevel Gear In Industrial Robot Arm

Hypoid Bevel Gear Milling & Mating Testing

Hypoid Gear Set Used In Mountain Bike


Product detail pictures:

Factory wholesale Hypoid Gear Efficiency - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures

Factory wholesale Hypoid Gear Efficiency - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures

Factory wholesale Hypoid Gear Efficiency - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures


Related Product Guide:

Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Factory wholesale Hypoid Gear Efficiency - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon , The product will supply to all over the world, such as: Guatemala, Toronto, Cyprus, You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We will provide our best service to satisfy all your needs! You should contact us right away!
  • The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Dinah from Indonesia - 2017.10.25 15:53
    On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
    5 Stars By Daphne from Angola - 2017.11.01 17:04
    Write your message here and send it to us