• Factory Supply Small Spiral Crown Wheel Pinion Bevel Gear

    Factory Supply Small Spiral Crown Wheel Pinion Bevel Gear

    The hypoid gear set used in KM-Series speed reducer . The hypoid system used is mainly solved the problems existing in the prior technology that the reducer has complex structure, unstable operation, small single-stage transmission ratio, large volume, unreliable use, many failures, short life, high noise, inconvenient disassembly and assembly, and inconvenient maintenance. Moreover, in the case of meeting the large reduction ratio, there are technical problems such as multi-stage transmission and low efficiency.

  • Factory OEM ODM Service Customized Hypoid Gear & Arm Spiral Bevel Gear

    Factory OEM ODM Service Customized Hypoid Gear & Arm Spiral Bevel Gear

    This set of spiral bevel gear was used in agriculture machinery .

    The gear shaft with two splines and threads which connects with spline sleeves .

    The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC .

  • Special Design for 1″ Hollow Shaft with Keyway

    Special Design for 1″ Hollow Shaft with Keyway

    This hollow shaft is used for electrical motors . Material is C45 steel ,with tempering and quenching heat treatment .

     

    Hollow shafts are often used in electrical motors to transmit torque from the rotor to the driven load. The hollow shaft allows for a variety of mechanical and electrical components to pass through the center of the shaft, such as cooling pipes, sensors, and wiring.

     

    In many electrical motors, the hollow shaft is used to house the rotor assembly. The rotor is mounted inside the hollow shaft and rotates around its axis, transmitting the torque to the driven load. The hollow shaft is typically made of high-strength steel or other materials that can withstand the stresses of high-speed rotation.

     

    One of the advantages of using a hollow shaft in an electrical motor is that it can reduce the weight of the motor and improve its overall efficiency. By reducing the weight of the motor, less power is required to drive it, which can result in energy savings.

     

    Another advantage of using a hollow shaft is that it can provide additional space for components within the motor. This can be particularly useful in motors that require sensors or other components to monitor and control the operation of the motor.

     

    Overall, the use of a hollow shaft in an electrical motor can provide a number of benefits in terms of efficiency, weight reduction, and the ability to accommodate additional components.

  • Straight Bevel Gear Used In Differential Gear Unit

    Straight Bevel Gear Used In Differential Gear Unit

    The straight bevel gear used in differential gear unit for tractor , The rear output bevel gear transmission mechanism of the tractor gearbox, the mechanism includes a rear drive drive bevel gear shaft and a rear output gear shaft arranged perpendicular to the rear drive drive bevel gear shaft. The bevel gear, the rear output gear shaft is provided with a driven bevel gear that meshes with the driving bevel gear, and the shifting gear is sleeved on the rear drive driving bevel gear shaft through a spline, characterized in that the driving bevel gear and the rear drive driving The bevel gear shaft is made into an integral structure. It can not only meet the rigidity requirements of power transmission, but also have a deceleration function, so that the small gearbox set on the rear output transmission assembly of the traditional tractor can be omitted, and the production cost can be reduced..