-
C45 2 module 90 degree bevel gear
This bevel gear is made of C45# steel, which has high wear resistance, is strong and durable, and has a long service life. Various sizes of helical gears are available: 1M, 1.5M, 2M/5-16mm shaft hole, 1.5 module, 20 teeth, 12mm shaft hole, M5 fixed hole, 90 degree steering angle.
-
2M 20 teeth bevel gear
A 2M 20 teeth bevel gear is a specific type of bevel gear with a module of 2 millimeters, 20 teeth, and a pitch circle diameter of approximately 44.72 millimeters. It is used in applications where power must be transmitted between shafts that intersect at an angle.
-
OEM bevel gear set for helical bevel gearmotors
This module 2.22 bevel gear set was used for helical bevel gearmotor .Material is 20CrMnTi with heat treat carburizing 58-62HRC ,lapping process to meet accuracy DIN8 .
-
Spiral bevel gears for agriculture gearbox
This set of spiral bevel gear was used in agriculture machinery .
The gear shaft with two splines and threads which connects with spline sleeves .
The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC .
-
Gleason bevel gear for tractors
The Gleason bevel gear used for agriculture tractors.
Teeth: Lapped
Module :6.143
Pressure Angle :20°
Accuracy ISO8 .
Material :20CrMnTi low carton alloy steel .
Heat treat :Carburization into 58-62HRC .
-
DIN8 bevel gear and pinion in bevel helical gearmotors
The bevel gear and pinion was used in bevel helical gearmotors .Accuracy is DIN8 under lapping process .
Module :4.14
Teeth : 17/29
Pitch Angle :59°37”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.1-0.13
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Alloy steel Lapped bevel gear sets in gearmotor
The lapped bevel gear set was used in different types of gearmotors Accuracy is DIN8 under lapping process .
Module:7.5
Teeth : 16/26
Pitch Angle :58°392”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.129-0.200
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Spiral Bevel Gears Used In Industrial Gearbox
Spiral bevel gears are often used in Industrial gearboxes , the industrial boxes with bevel gears are used in many different industries ,mainly used to change the speed and the direction of transmission. Generally, bevel gears are ground.
