-
Customized OEM Forged Ring Transmission spiral bevel gears set for agriculture gearbox
This set of spiral bevel gear was used in agriculture machinery .
The gear shaft with two splines and threads which connects with spline sleeves .
The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC. -
20CrMnTi Spiral Bevel Gears for Agricultural Machinery
The material used for these gears is 20CrMnTi, which is a low carbon alloy steel. This material is known for its excellent strength and durability, making it suitable for heavy-duty applications in agricultural machinery.
In terms of heat treatment, carburization was employed. This process involves introducing carbon into the surface of the gears, resulting in a hardened layer. The hardness of these gears after heat treatment is 58-62 HRC, ensuring their ability to withstand high loads and prolonged use.
-
2M 20 22 24 25 teeth bevel gear
A 2M 20 teeth bevel gear is a specific type of bevel gear with a module of 2 millimeters, 20 teeth, and a pitch circle diameter of approximately 44.72 millimeters. It is used in applications where power must be transmitted between shafts that intersect at an angle.
-
OEM bevel gear set for helical bevel gearmotors
This module 2.22 bevel gear set was used for helical bevel gearmotor .Material is 20CrMnTi with heat treat carburizing 58-62HRC ,lapping process to meet accuracy DIN8 .
-
Spiral bevel gears for agriculture gearbox
This set of spiral bevel gear was used in agriculture machinery .
The gear shaft with two splines and threads which connects with spline sleeves .
The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC .
-
Gleason lapping spiral bevel gear for tractors
The Gleason bevel gear used for agriculture tractors.
Teeth: Lapped
Module :6.143
Pressure Angle :20°
Accuracy ISO8 .
Material :20CrMnTi low carton alloy steel .
Heat treat :Carburization into 58-62HRC .
-
DIN8 bevel gear and pinion in bevel helical gearmotors
The spiral bevel gear and pinion was used in bevel helical gearmotors .Accuracy is DIN8 under lapping process .
Module :4.14
Teeth : 17/29
Pitch Angle :59°37”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.1-0.13
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Alloy steel lapped bevel gear sets in bevel gearmotor
The lapped bevel gear set was used in different types of gearmotors Accuracy is DIN8 under lapping process .
Module:7.5
Teeth : 16/26
Pitch Angle :58°392”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.129-0.200
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Cast Steel Hard Gear Crown Spiral Bevel Gears Used In Industrial Gearbox
Spiral bevel gears are often used in Industrial gearboxes , the industrial boxes with bevel gears are used in many different industries ,mainly used to change the speed and the direction of transmission. Generally, bevel gears are ground.
