China Hypoid Bevel Gear Used In Medical Devices Electric Wheelchair factory and manufacturers

Hypoid Gear Used In Medical Devices Electric Wheelchair Featured Image

Short Description:

The hypoid bevel gear used in medical devices like electric wheelchair. The reason is because

1. the axis of the driving bevel gear of the hypoid gear is offset downward by a certain offset relative to the axis of the driven gear, which is the main feature that differentiates the hypoid gear from the spiral bevel gear. This feature can reduce the position of the driving bevel gear and the transmission shaft under the condition of ensuring a certain ground clearance, thereby lowering the center of gravity of the body and the whole vehicle, which is beneficial to improve the driving stability of the vehicle.

2.The hypoid gear has good working stability, and the bending strength and contact strength of the gear teeth are high, so the noise is small and the service life is long.

3. When the hypoid gear is working, there is relatively large relative sliding between the tooth surfaces, and its movement is both rolling and sliding.

Send email to us

Product Detail

Product Tags

How to produce hypoid bevel gears ?

Two processing methods of hypoid gears

The hypoid bevel gear was introduced by Gleason Work 1925 and has been developed for many years. At present, there are many domestic equipments that can be processed, but the relatively high-precision and high-end processing is mainly made by foreign equipment Gleason and Oerlikon . In terms of finishing, there are two main gear grinding processes and lapping processes, but the requirements for the gear cutting process are different .For the gear grinding process, the gear cutting process is recommended to use face milling, and the lapping process is recommended to face hobbing .

The hypoid gear gears processed by the face milling type are tapered teeth, and the gears processed by the face hobbing type are equal height teeth, that is the tooth heights at the large and small end faces are the same.

The usual processing process is roughly machining after pre-heating, and then finishing machining after heat treat. For the face hobbing type, it needs to be lapped and matched after heating. Generally speaking, the pair of gears ground together should still be matched when assembled later. However, in theory, gears with gear grinding technology can be used without matching. However, in actual operation, considering the influence of assembly errors and system deformation, the matching mode is still used.

Manufacturing Plant

China the first one to import USA UMAC technology for hypoid gears .

hypoid spiral gears manufacturing workshop

Production Process

Raw Material

Rough Cutting

Turning

Quenching And Tempering

Gear Milling

Heat Treat

Gear Grinding

Testing

Inspection

Reports

We will provide compete quality reports to customers before every shipping like dimension report ,material cert ,heat treat report ,accuracy report and other customer’s required quality files .