Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The key to our success is "Good Product or service High quality, Reasonable Rate and Efficient Service" for Straight Spur Gear, Helical Gear Manufacturers, Nmrv Gearbox, We sincerely welcome overseas consumers to consult for your long-term cooperation as well as the mutual advancement.We strongly think that we will do superior and far better.
New Arrival China China Hypoid Gear Supplier - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon Detail:

Hypoid Gear Definition

hypoid gear working

A hypoid is a type of spiral bevel gear whose axis does not intersect with the  axis of the meshing gear. Hypoid gearings are used in power transmission products that are more efficient than conventional worm gearing. Transmission efficiency can reach 90% .

Hypoid Gear Feature

hypoid gear feature

The shaft angle of the hypoid gear is 90°, and the torque direction can be changed to 90°. This is also the angle conversion often required in the automobile, airplane, or wind power industry. At the same time, a pair of gears with different sizes and different numbers of teeth are meshed to test the function of increasing torque and decreasing speed, which is commonly referred to as “torque increasing and decreasing speed”. If a friend who has driven a car, especially when driving a manual car when learning to drive, when climbing a hill, the instructor will let you go to a low gear, in fact, it is to choose a pair of gears with a relatively large speed, which is provided at low speeds. More torque, thus providing more power to the vehicle.

1. Adjustable angular change of torque power

2. Higher loads: In the wind power industry, the automotive industry, whether it is passenger cars, SUVs, or commercial vehicles such as pickup trucks, trucks, buses, etc., will use this type to provide greater power.

3. Higher efficiency, lower noise: The pressure angles of the left and right sides of its teeth can be inconsistent, and the sliding direction of the gear meshing is along the tooth width and tooth profile direction, and a better gear meshing position can be obtained through design and technology, so that the entire transmission is under load. The next is still excellent in NVH performance.

4 Adjustable offset distance: Due to the different design of the offset distance, it can be used to meet different space design requirements. For example, in the case of a car, it can meet the ground clearance requirements of the vehicle and improve the pass ability of the car.

Manufacturing Plant

China the first one to import USA UMAC technology for hypoid gears .

door-of-bevel-gear-worshop-11
hypoid spiral gears heat treat
hypoid spiral gears manufacturing workshop
hypoid spiral gears machining

Inspection

Dimensions and Gears Inspection

Reports

We will provide compete quality reports to customers before every shipping like dimension report ,material cert ,heat treat report ,accuracy report and other customer’s required quality files .

Heat Treat report

Heat Treat report

Flaw detection report

Flaw Detection report

Packages

inner

Inner Package

Inner (2)

Inner Package

Carton

Carton

wooden package

Wooden Package

Our video show

Hypoid Gears

Km Series Hypoid Gears For Hypoid Gearbox

Hypoid Bevel Gear In Industrial Robot Arm

Hypoid Bevel Gear Milling & Mating Testing

Hypoid Gear Set Used In Mountain Bike


Product detail pictures:

New Arrival China China Hypoid Gear Supplier - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures

New Arrival China China Hypoid Gear Supplier - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures

New Arrival China China Hypoid Gear Supplier - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures


Related Product Guide:

We continuously execute our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management advertising and marketing gain, Credit history attracting buyers for New Arrival China China Hypoid Gear Supplier - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon , The product will supply to all over the world, such as: Denver, Canberra, Swedish, We always hold on the company's principle "honest, professional, effective and innovation", and missions of: let all drivers enjoy their driving at night, let our employees can realize their value of life, and to be stronger and service more people. We are determined to become the integrator of our product market and one-stop service provider of our product market.
  • The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
    5 Stars By Novia from Johor - 2018.12.22 12:52
    Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
    5 Stars By Page from Houston - 2017.09.16 13:44
    Write your message here and send it to us