-
High accuracy Helical gear shaft for planetary gear reducer
This helical gear shaft was used in planetary reducer.
Material 16MnCr5, with heat treat carburizing, hardness 57-62HRC.
Planetary gear reducer is widely used in machine tools, New Energy vehicles and Air planes etc., with its wide range of reduction gear ratio and high power transmission efficiency.
-
Industrial bevel gears pinion used in bevel gearbox
This module 10 spiral bevel gears are used in industrial gearbox. Usually the large bevel gears used in industrial gearbox will be ground with high precision gear grinding machine ,with stable transmission ,lower noise and an inter-stage efficiency of 98% . Material is 18CrNiMo7-6 with heat treat carburizing 58-62HRC , accuracy DIN6 .
-
Module 3 OEM helical gear shaft
We supplied different types of conical pinion gears from range from Module 0.5, Module 0.75,Module 1 ,Moule 1.25 mini gear shafts.Here is the whole production process for this module 3 helical gear shaft
1) Raw material 18CrNiMo7-6
1)Forging
2)Pre-heating normalizing
3)Rough turning
4)Finish turning
5)Gear hobbing
6)Heat treat carburizing 58-62HRC
7)Shot blasting
8)OD and Bore grinding
9)Spur gear grinding
10)Cleaning
11)Marking
12)Package and warehouse -
DIN6 3 5 ground helical gear set for mining
This helical gear set was used in reducer with high precision DIN6 which was obtained by grinding process . Material : 18CrNiMo7-6,with heat treat carburizing ,hardness 58-62HRC . Module : 3
Teeth :63 for helical gear and 18 for helical shaft .Accuracy DIN6 according to DIN3960 .
-
18CrNiMo7 6 ground spiral bevel gear set
This module 3.5 spiral bevel gear set was used for high precision gearbox .Material is 18CrNiMo7-6 with heat treat carburizing 58-62HRC ,grinding process to meet accuracy DIN6 .
-
Transmission Output Worm gear set used in gear reducer
This worm gear set was used in worm gear reducer ,the worm gear material is Tin Bonze and the shaft is 8620 alloy steel . Usually worm gear could not do grinding ,the accuracy ISO8 is ok and the worm shaft has to be ground into high accuracy like ISO6-7 .Meshing test is important for worm gear set before every shipping .
-
External spur gear for mining machinery
This external spur gear was used in mining equipment . Material : 20MnCr5 ,with heat treat carburizing ,hardness 58-62HRC . Mining Equipment means machinery directly used for mineral mining and enrichment operations , Including mining machinery and beneficiation machinery .Cone crusher gears are one of them we supplied regularly .
-
OEM bevel gear set for helical bevel gearmotors
This module 2.22 bevel gear set was used for helical bevel gearmotor .Material is 20CrMnTi with heat treat carburizing 58-62HRC ,lapping process to meet accuracy DIN8 .
-
DIN6 Skiving internal helical gear housing in high precision gears
DIN6 is the accuracy of the internal helical gear . Usually we have two ways to meet high accuracy .
1) Hobbing + grinding for internal gear
2) Power skiving for internal gear
However for small internal helical gear ,hobbing is not easy to process ,so normally we would do power skiving to meet the high accuracy and also high efficiency .For big internal helical gear ,we will use hobbing plus grinding method . After power skiving or grinding ,middle carton steel like 42CrMo will do nitriding to increase the hardness and resistance
-
Spur gear shaft for construction machinery
This spur gear shaft used in construction machinery . Gear shafts in transmission machinery are usually made of 45 steel in high-quality carbon steel, 40Cr, 20CrMnTi in alloy steel, etc. Generally, it meets the strength requirements of the material, and the wear resistance is good. This spur gear shaft was made by 20MnCr5 low carbon alloy steel ,carburizing into 58-62HRC.
-
Ratio Ground spur gears used for cylindrical reducer
These ground straight spur gears are used for cylindrical reducer gears ,which belongs to external spur gears . They were ground , high accuracy accuracy ISO6-7 .Material :20MnCr5 with heat treat carburizing ,the hardness is 58-62HRC .The ground process makes the noise small and increase gears life .
-
power skiving internal ring gear for planetary gearbox
The helical internal ring gear was produced by power skiving craft ,For small module internal ring gear we often suggest to do power skiving instead of broaching plus grinding ,since power skiving is more stable and also has high Efficiency ,it takes 2-3 minutes for one gear ,accuracy could be ISO5-6 before heat treat and ISO6 after heat treatment .
Module is 0.8 ,teeth :108
Material :42CrMo plus QT ,
Heat Treatment :Nitriding
Accuracy: DIN6
