• Cylindrical spur gear for agricultural equipment

    Cylindrical spur gear for agricultural equipment

    Here is the whole production process for this cylindrical gear

    1) Raw material 20CrMnTi

    1) Forging

    2) Pre-heating normalizing

    3) Rough turning

    4) Finish turning

    5) Gear hobbing

    6) Heat treat carburizing to H

    7) Shot blasting

    8) OD and Bore grinding

    9) Spur gear grinding

    10) Cleaning

    11) Marking

    Package and warehouse

  • External spur gear for mining machinery

    External spur gear for mining machinery

    This external spur gear was used in mining equipment . Material : 20MnCr5 ,with heat treat carburizing ,hardness 58-62HRC . Mining Equipment means machinery directly used for mineral mining and enrichment operations , Including mining machinery and beneficiation machinery .Cone crusher gears are one of them we supplied regularly .

  • Spur gear shaft for construction machinery

    Spur gear shaft for construction machinery

    This spur gear shaft used in construction machinery .  Gear shafts in transmission machinery are usually made of 45 steel in high-quality carbon steel, 40Cr, 20CrMnTi in alloy steel, etc. Generally, it meets the strength requirements of the material, and the wear resistance is good. This spur gear shaft was made by 20MnCr5 low carbon alloy steel ,carburizing into 58-62HRC.

  • Ratio Ground spur gears used for cylindrical reducer

    Ratio Ground spur gears used for cylindrical reducer

    These ground straight spur gears are used for cylindrical reducer gears  ,which belongs to external spur gears . They were ground , high accuracy accuracy ISO6-7 .Material :20MnCr5 with heat treat carburizing ,the hardness is 58-62HRC .The ground process makes the noise small and increase gears life .

  • Spur Gear Used In Metallurgical parts tractor machinery powder

    Spur Gear Used In Metallurgical parts tractor machinery powder

    This set of spur gear was used in tractors ,it was grounded with high precision ISO6 accuracy ,both profile modification and lead modification into K chart.