Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our focus on should be to consolidate and enhance the quality and repair of present products, in the meantime constantly establish new products to meet unique customers' requires for Helical Gear Grinding, Nmrv Housings, Crusher Bevel Gears, With the eternal goal of "continuous quality improvement, customer satisfaction", we are sure that our product quality is stable and reliable and our products are best-selling at home and abroad.
Wholesale Hypoid Gear Vs Worm Gear - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon Detail:

Hypoid Gear Definition

hypoid gear working

A hypoid is a type of spiral bevel gear whose axis does not intersect with the  axis of the meshing gear. Hypoid gearings are used in power transmission products that are more efficient than conventional worm gearing. Transmission efficiency can reach 90% .

Hypoid Gear Feature

hypoid gear feature

The shaft angle of the hypoid gear is 90°, and the torque direction can be changed to 90°. This is also the angle conversion often required in the automobile, airplane, or wind power industry. At the same time, a pair of gears with different sizes and different numbers of teeth are meshed to test the function of increasing torque and decreasing speed, which is commonly referred to as “torque increasing and decreasing speed”. If a friend who has driven a car, especially when driving a manual car when learning to drive, when climbing a hill, the instructor will let you go to a low gear, in fact, it is to choose a pair of gears with a relatively large speed, which is provided at low speeds. More torque, thus providing more power to the vehicle.

1. Adjustable angular change of torque power

2. Higher loads: In the wind power industry, the automotive industry, whether it is passenger cars, SUVs, or commercial vehicles such as pickup trucks, trucks, buses, etc., will use this type to provide greater power.

3. Higher efficiency, lower noise: The pressure angles of the left and right sides of its teeth can be inconsistent, and the sliding direction of the gear meshing is along the tooth width and tooth profile direction, and a better gear meshing position can be obtained through design and technology, so that the entire transmission is under load. The next is still excellent in NVH performance.

4 Adjustable offset distance: Due to the different design of the offset distance, it can be used to meet different space design requirements. For example, in the case of a car, it can meet the ground clearance requirements of the vehicle and improve the pass ability of the car.

Manufacturing Plant

China the first one to import USA UMAC technology for hypoid gears .

door-of-bevel-gear-worshop-11
hypoid spiral gears heat treat
hypoid spiral gears manufacturing workshop
hypoid spiral gears machining

Inspection

Dimensions and Gears Inspection

Reports

We will provide compete quality reports to customers before every shipping like dimension report ,material cert ,heat treat report ,accuracy report and other customer’s required quality files .

Heat Treat report

Heat Treat report

Flaw detection report

Flaw Detection report

Packages

inner

Inner Package

Inner (2)

Inner Package

Carton

Carton

wooden package

Wooden Package

Our video show

Hypoid Gears

Km Series Hypoid Gears For Hypoid Gearbox

Hypoid Bevel Gear In Industrial Robot Arm

Hypoid Bevel Gear Milling & Mating Testing

Hypoid Gear Set Used In Mountain Bike


Product detail pictures:

Wholesale Hypoid Gear Vs Worm Gear - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures

Wholesale Hypoid Gear Vs Worm Gear - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures

Wholesale Hypoid Gear Vs Worm Gear - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon detail pictures


Related Product Guide:

All we do is always involved with our tenet " Consumer initial, Trust first, devoting within the food stuff packaging and environmental defense for Wholesale Hypoid Gear Vs Worm Gear - Hypoid Spiral Gears used in KM-series Speed Reducer – Belon , The product will supply to all over the world, such as: Jordan, Jakarta, Ottawa, Furthermore, all of our items are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our goods, please don't hesitate to contact us. We will do our best to meet your needs.
  • It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Meroy from Jakarta - 2018.12.30 10:21
    The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
    5 Stars By Gladys from Bahamas - 2017.11.11 11:41
    Write your message here and send it to us